華光TD-G型免處理熱敏CTP版是一種新型的環保印刷產品，是適合于熱敏CTP制版機的專用版材，曝光之后無需任何沖洗加工步驟即可直接上機印刷。

TD-G is a new green printing product?suitable for thermal CTP platesetters. There is no need of any processing steps before mounting exposed plates on pss.

 

l   陰圖型非燒蝕感光體系

l   兼容市場主流熱敏CTP制版機，適應性強

l   經熱敏CTP制版機掃描成像后，無需任何沖洗加工步驟即可直接上機印刷

l   卓越的網點還原性、制版性能穩定、寬容度大

l   潛影穩定期長，制版后可保存至少一周再印刷

l   優質鋁版基、專業涂層配方設計

l   Negative non-ablation photosensitive system

l   Compatible with the dominant devices in the market

l   Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter

l   Good dot reproduction, stable performance, wide processing latitude

l   Long stability of latent image, can be stored at least a week after plate-making

l   High quality aluminum substrate, professional coating formulation

 

 

 

 

版材類型	非燒蝕熱敏陰圖型
版基	電解砂目及陽極氧化鋁版基
版厚度	0.15mm/0.30mm
光譜響應范圍	800-850nm
適用制版機	市場各種主流熱敏CTP制版機
*低成像能量	130~150mJ/cm2
潛影穩定期	≤7天
推*加網方式	1％～99％@200lpi調幅加網、20u調頻加網及混合加網
過版紙數	<50張
安全燈	在日光燈下1小時（無自然光直射），黃光下4小時
沖洗加工	不需要，曝光后直接上機印刷
耐印力	10萬印，實際耐印力取決于印刷條件。
烤版	不推*烤版

Type	Non-ablation thermal negative-type
Substrate	Electrolyte graining and anodized Al substrate
Thickness	0.15mm/0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130~150mJ/cm2
The period of latent image stabilization	≤7days
Recommended screen method	1％～99％@200lpi AM/ 20u FM and mixture
The paper number of start-up	<50 sheets
Safety light	1 hour under fluorescent lamp（no direct irradiation with natural light), 4 hours under yellow light
Processing	Without processing, directly on pss
Run length	100,000 impssions, actual run length depends on printing conditions
Baking	No reccomanded

Note:

1. After imaging exposure, the longest time which plate can be placed for without affecting the printing quality is the latent image stabilization.

2. The paper number of start-up is the paper number at loss from the first paper to providing completely clean background.

3. Printing methods: firstly clean the ink on the rubber blanket with washing water, run water roller 30 to 60 seconds, and then close the ink roller to run for 20-40 seconds and finally start paper printing.

Application:

Suitable for sheet-fed offset pss or high speed rotary offset pss

Run length: 100,000 impssions

Suitable for different types of traditional inks and fountain solutions, including alcohol’s substitutes as fountain solutions

Unsuitable to improve run length by baking plates?

Packed in seal and stored by means of pventing from light/moisture proof, over heat and high humidity. Recommended conditions：18℃～ 24℃，40% ～ 50% RH．